In recent years, touchless car washes are very popular. Many car owners love the idea of not needing to wash their car with water.
This guide aims to simplify touchless car washing and show why everyone should do it.
Why do people like touchless car washes?
- Protects car’s paint from scratches and swirls: More than 90% of the swirls or scratches cars get are due to poor car washing and drying. Micro-scratching and marring can be caused by using towels or wash mitts that are full of dirt and debris. This marring can be even more problematic for black and dark-colored cars because it is easier to see the swirl marks and scratches. Because you can avoid this problem with touchless car wash, which only use high-pressure water and do not apply any other chemicals to your car’s paint.
- Time-saving Touchless car washing dramatically reduces the amount of time spent cleaning your car. It takes time to clean your car with wash mitts and towels. It’s easy to do touchless car washing. Simply hose down the car to rinse it off, then spray foam on it. Rinse it again and dry it with a blower.
- Saves money: Touchless car washing saves a lot of water and you don’t need to purchase towels and wash mitts for these washes.
- Less likely to cause damage: It’s easy for car accessories or parts to get damaged by washing the car in a conventional manner. antennas. These damage can be avoided by using touchless car washes.
Keeps your car clean between full wash-downs. It can be difficult to find the time in your busy schedule to give your car an extensive wash. You can keep your car looking great until you give it a thorough wash by doing a quick touch-up car wash for 20 minutes.
DIY Touchless Car Wash Vs. Visit An Automatic Car Wash
Full-service, automated touchless quick quack car wash can be convenient. They are affordable and can do the job in a matter of minutes. Automated touchless car washes tend to use harsher cleaning products than professional detailers would recommend.
These car cleaners can strip away any wax, polish, sealant you have put on your car. You should not take your car to an automated touchless vehicle wash if you haven’t added any additional protection to the car’s paint. The harsh cleaning products could cause damage to the clear coat layer. Touchless car washing in person gives you greater control over the soap and the equipment used. You will get better results with better soap and better equipment.
It is also worth noting that the pressurized water jets in automatic car washes are not able to reach every corner and crevice of cars in the same way that handheld pressure washers can.
Large blow dryers used in touchless automated car washes don’t dry cars well, as they are not always targeted. This aspect of touchless, in-person car washing wins because you have greater control over drying. This will allow you to concentrate your blower on the most difficult-to-reach areas to get rid of all water.
Step-By-Step Guide To A Touchless Wash
To prevent the pressure water from getting into your car, make sure you close all windows and doors when doing a touchless wash. To avoid any damage to your car’s exterior antenna, you will want to reduce the length of the car’s exterior antenna. Touchless washing should not be done in direct sun or on hot surfaces. If it is not cool outside, do it in a garage.
Step 1: Pre-Rinse
The pre-rinse is simply a simple process of washing the car with a pressure washer. Pre-rinsing the car is necessary to loosen and/or remove large amounts of dirt and other debris. A medium pressure setting on the pressure washer will suffice. Spraying should be done at least 4-5 feet from your car. You can get closer if you feel the water pressure rising.
Step 2: Foam Cannon Or Foam Gun
The foam cannon is better. This attachment attaches to a pressure washer and evenly applies car soap to your vehicle. The foam gun attachment for a garden hose is useful but doesn’t work at the same pressure.
Use the soap-to water ratio guidelines on your car wash detergent bottle to pour your soap into the foam cannon container and add the correct amount of water. Mix the mixture by swirling it around, but don’t shake it vigorously. Attach the canister to the rest and then attach the 1/4-inch quick connector plug to the pressure washer gun. Adjust the soap control knob or nozzle control knob according to your preference, then turn on the pressure washer and spray foam onto your vehicle.
The soap control nozzle regulates how much soap is drawn up the suction tubes when the pressure washer activates. Adjusting it to draw more soap will result is thicker foam. The soap active agents or detergents in the soap will have more time to work on the car’s surface if the foam is left for longer.
Step 3: Rinse
Rinse your car with a medium pressure setting. Adjust the knob at the nozzle to allow the water pressure to spread across a larger surface. As you did with the pre-rinse, keep the car at a safe distance (4-5 feet).
Step 4: Dry
If you want to make sure you do it correctly, we have a complete guide for drying a car. A blower designed for drying cars is ideal for this simple task. You can also use leaf blowers, but be careful as they may blow debris onto your car. You may also find them to be difficult to direct the air to certain areas of your car because they have large nozzles.
Blowing dry your car should be done starting at the top. To remove any water trapped in these areas, blow air into each section.
